View LTPL-C16FUVM365_8910678.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lite-on dcc release lite-on technology corp. / optoelectronics no.90,chien 1 road, chung ho, new taipei city 23585, taiwan, r.o.c. tel: 886-2-2222-6181 fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto specific lightingproduct data sheetLTPL-C16FUVM365 spec no.: ds23-2016-0117effective date: 12/14/2016revision: - bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4
1 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 1. description the lt pl - c16 series is a revolutionary, energy efficient and ultra - compact new light source, combining the lifetime and reliability advantages of light emitting diodes with the brightness of conventional lighting. it gives you total design freed om and unmatched brightness, c reating a new opportunities for solid state lighting to displace conv entional lighting technologies. . 1 . 1 features ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process . ? eia std package . ? i.c. compatible . ? meet green product and pb - free(according to rohs) 1 . 2 application ? uv curing , uv marking , uv gluing ? uv drying of printing inks etc. 2 . outline dimensions notes : 1. all dimensions are in millimeters. 2. tolerance is 0. 1 mm (.00 4 ") unless otherwise noted.
2 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 3 . absolute maximum ratings at ta=25 parameter symbol rating unit power dissipation po 16 0 m w dc forward current if 4 0 ma reverse voltage *6 v r 5 v operating temperature range t opr - 40 ~ + 85 c storage temperature range t stg - 40 ~ + 100 c junction temperature tj 9 0 c 4 . electro - o ptical c haracteristics at t a =25c parameter symbol value unit test condition min. typ. max. radi ant flux e 1 4 19 2 6 m w if = 20ma viewing angle 2 ? 1/2 -- 1 35 -- d eg peak wavelength wp 36 2.5 36 7 370 if = 20ma forward voltage vf 2. 8 3. 5 4.0 v if = 20ma reverse voltage v r -- -- 1.2 v i r = 10ua note 6 thermal resistance rth j - s 53 c /w notes : 1. caution in esd: static electricity and surge will damages the led. it is recommend ed to use a wrist band or anti - e lectrostatic glove when handling the led. all devices, equipment and machinery must be properly grounded. 2 . cas14 0b is the test standard for th e radi ant flux ( e ) & peak wavelength ( wp ) . 3 . radi ant flux ( e ) measurement tolerance: 10% 4 . forward voltage ( vf ) measurement tolerance: 0.1v 5 . peak wavelength ( wp ) measurement tolerance: 3 nm 6. reverse current ( i r ) condition is applied for r everse voltage ( v r ) test only ( for test zener function) . the dev ice is not designed for reverse operation. oper ating the led under reverse current condition long time might result in damage or failure of the component .
3 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 5 . bin code list vf : forward voltage spec. table vf bin vf (v) @ if = 20ma min. m ax. v 1 2. 8 3.2 v 2 3.2 3. 6 v 3 3. 6 4.0 forward v oltage measurement tolerance : 0.1v e ? ? radiant flux spec. table e bin e ( mw ) @ if = 20ma min. max. r3 14 16 r4 16 18 r5 18 20 r6 20 22 r7 22 24 r8 24 26 radiant flux measurement tolerance: 10% wp : peak wavelength spec table wp b in wp (nm) @ if = 20ma min. max. p3 m 2 36 2.5 365 .0 p3 n 1 365 .0 3 67.5 p3 n 2 367.5 370.0 peak wavelength tolerance: +/ - 3nm notes: 1. bin classification code is marked on each packing bag.
4 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 6 . typical electrical / optical characteristics curves (25 ? c ambient temperature unless otherwise noted ) fig 1. relative spectrum of emission fig.2 relative radiant flux vs. forward current
5 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 fig. 3 forward current vs. forward voltage fig.4 relative radiant flux vs. junction temperature
6 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 7 . user guide suggest ir reflow condition for pb free process notes: 1. all temperatures refer to topside of the package, measured on the package body surface. 2. the soldering profile could be further referred to different soldering grease material characteristic. the grease vendor will provide this information. 3. a rapid - rate pr ocess is not recommended for the leds cooling down from the peak temperature. 4. although the recommended reflow conditions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the leds. 5. liteon canno t make a guarantee on the leds which have been already assembled using the dip soldering method.
7 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 cleaning do not use unspecified chemical liquid to clean led , they could harm the package. if cleaning is necessary, immerse the led in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. recommend printed circuit board attachment pad infrared / vapor phase reflow soldering package dimensions of tape note: all dimensions are in m m
8 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 package dimensions of reel notes: 1. empty component pockets sealed with top cover tape. 2. 7 inch reel and typical quantity is 15 00 pieces per reel. 3 . the maximum number of consecutive missing lamps is two. 4 . in accordance with eia - 481 - 1 - b specifications.
9 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 8 . cautions application the leds described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).consult liteons sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the leds may directly jeopardize life or health (suc h as in aviation, transportation, traffic control equipment, medical and life supp ort systems and safety devices). storage t his product is qualified as moisture sensitive level 3 per jedec j - std - 020 precaution when handing this moisture sensitive product is important to ensure the reliability of the product. the package is sealed : the leds should be stored at 30 c or less and 90 % rh or less . and the leds are limited to use within one year, while the leds is packed in moisture - proof package with the desiccants inside. the package is opened : the leds should be stored at 30 c or less and 60 % rh or less . moreover , the leds are limited to solder process within 168hrs. if the humidity indicator shows the pink color in 10% even higher or exceed the storage limiting time since opened, that we recommended to baking leds at 60 c at least 48hrs . to seal the remainder leds return to package, it s recommended to be with workable desiccants in original package. soldering recommended soldering conditions: reflow soldering soldering iron pre - heat pre - heat time peak temperature soldering time 150~200c 120 sec. max. 260c max. 10 sec. max.(max. two times) temperature soldering time 300c max. 3 sec. max. (one time only)
10 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 drive method an led is a current - operated device. in order to ensure intensity uniformity on multiple leds connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each led as shown in circuit a below. circuit model a circuit model b (a) recommended circuit. (b) the brightness of each led might appear different due to the differences in the i - v characteristics of those leds. esd (electrostatic discharge) static electricity or power surge will damage the led. suggestions to prevent esd damage: ? use of a conductive wrist band or anti - e lectrostatic glove when handling these leds. ? all devices, equipment, and machinery must be properly grounded. ? work tables, storage racks, etc. should be properly grounded. ? use ion blower to neutralize the static charge which might have built up on surface of the leds plastic lens as a result of friction between leds during storage and handling. esd - damaged leds will exhibit a bnormal characteristics such as high reverse leakage current, low forward voltage, or no light - up at low currents. to verify for esd damage, check for light - up and vf of the suspect leds at low currents. the vf of good leds should be > 2.0v@0.1ma for ingan product led led
11 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 others the appearance and specifications of the product may be modified for improvement without prior notice. suggested c hecking l ist training and certification 1. everyone working in a static - safe area is esd - certified? 2. training records kept and re - certification dates monitored? static - safe workstation & work areas 1. static - safe workstation or work - sreas have esd signs? 2. all surfaces and objects at all static - safe workstation and within 1 ft measure less than 100v? 3. all ionizer activated, positioned towards the units? 4. each work surface mats grounding is good? personnel grounding 1. every person (including visitors) handling esd sensitive (esds) items wear wrist strap, heel strap or conductive shoes with conductive flooring? 2. if conductive footwear used, conductive flooring also present where operator stand or walk? 3. garments, hairs or anything closer than 1 ft to esd items measure less than 100v*? 4. every wrist strap or heel strap/conductive shoes ch ecked daily and result recorded for all dls? 5. all wrist strap or heel strap checkers calibration up to date? note: *50v for blue led. device handling 1. every esds items identified by eia - 471 labels on item or packaging? 2. all esds items completely inside properly closed static - shielding containers when not at static - safe workstation? 3. no static charge generators (e.g. plastics) inside shielding containers with esds items? 4. all flexible conductive and dissipative package materials inspected befor e reuse or recycle? others 1. audit result reported to entity esd control coordinator? 2. corrective action from previous audits completed? 3. are audit records complete and on file?
12 / 12 p art no. : ltpl - c16fuv m 3 6 5 bns - od - fc002/a4 specific lighting ltpl - c16fuv m 3 6 5 9. datasheet version: version date owner change item 1 2015/ 11 / 2 7 davidkao initial specification 2 2016/01/29 davidkao update m a x dc f orward current 60ma for maximum r atings (p a ge 3) update format for e lectrical / o ptical c haracteristics c urves fig.1 ~ fig.4 (page 5 - 6) 3. 2016/02/03 chunchieh 1. change a bsolute maximum ratings : power dissipation ( po ) to 240mw junction temperature ( tj ) to 90 c (page.3) 2. change electro - o ptical c haracteristics : radi ant flux ( e ) range to 10 ~ 20 mw radiant flus bin table : r1 to r5 (page.3, 4) 3. modify suggest ir reflow condition (page 7) 4. change packge qty per reel: typ. 1500pcs/reel, min . 100pcs/reel for remainders (page 9) 3 . 1 2016/02/26 chunchieh 1. change electro - o ptical c haracteristics : peak wavelength spec table (page 4) 3.2 2016/08/29 chunchieh 1. change electro - o ptical c haracteristics : radiant flux spec table (page 4) 3.3 2016/10/25 chunchieh 1. modify radiant flux spec: add r8 bin, remove r2 bin (page 4)

▲Up To Search▲

Price & Availability of LTPL-C16FUVM365

	To Download LTPL-C16FUVM365 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .